Permobil M1 Service Manual page 91

Permobil M1
2. On PS armrest, remove end cap (A) before pulling off the armrest
pad.
Reinstall in reverse order. Find right position before tightening the four
screws holding the armrest pad.
Tightening torque: 7.2 lb.ft.
Armrest pad bracket
Removing armrest pad bracket
1. Switch Off the main power switch on the control panel.
1. Loosen the four screws (A).
2. On PS armrest, remove end cap (A) before pulling off the armrest
pad.
3. Pull of the armrest pad.
Figure 276. Armrest pad removal.
Figure 277. On/Off symbol depending on model.
Figure 278. The location of the four screws.
Figure 279. The armrest pad removal.
Repairs
91