Permobil M1 Service Manual page 25

Permobil M1
4. On wheelchairs equipped with front lights, push in the light cable
from the cable channel on the swing arm cover.
5. Fit the swing arm accent cover by carefully pushing it in to position
until you hear a "click".
Removing rear swing arm covers
1. Switch off the main power switch on the control panel.
2. Pry off the swing arm accent cover, use a screwdriver or equivalent
for removing the accent covers.
Figure 51.
Figure 52. On/Off symbol depending on model.
Figure 53. The rear swing arms are located in the back
of the chassis.
Figure 54. Use a screwdriver or equivalent for removing
the accent covers.
Repairs
25