Permobil M1 Service Manual page 36

Repairs
6. Pull the cable holder to the rear and up.
Mounting cable holder – battery box
7. Push in the cable holder's lower fasteners into the cutouts.
8. Push the cable holder down. Be sure that the upper fastener grabs
the edge of the battery box.
9. Push the cables into the cable holder.
10. Mount the chassis covers, see Covers , Page 14.
11. Switch the main circuit breaker to On. See
Main circuit breaker , Page 79.
12. Switch On the main power switch on the control panel.
Wheels
The wheelchair drive wheels are available with pneumatic tires or flat-
free tires. The casters have solid polyurethane tires.
36
Figure 90. The battery box has cutouts for the cable
holders.
Figure 91. The battery box has cutouts for the cable
holders.
Figure 92. The cables from the battery and control
panel/ISM should run through the cable holders.
Figure 93. On/Off symbol depending on model.
Permobil M1