Permobil M1
The following tools are necessary for this task:
• 1 Torque wrench.
• Allen socket, 5 mm.
• Allen socket, XX mm.
The armrest width can be adjusted by refitting the armrest on the inside
or outside of the arm.
1. Loosen the four screws (A).
2. On PS armrest, remove stopper (A) before pulling off the armrest
pad.
3. Release the cable from cable holder (A).
4. Slide the armrest pads (B) off.
Figure 413. Loosen the screws.
Figure 414. Armrest pad removal.
A
B
Figure 415. Release cable from clip and slide armrest
pads off.
Adjustments
B
139