Permobil M1 Service Manual page 92

Repairs
4. Remove the screw (A), armrest pad bracket (B) and lock nut (D)
from the arm (C).
Mounting armrest pad bracket
1. Mount the screw (A) through the armrest pad bracket (B) and the
arm (C) into the lock nut (D). Tightening torque: 17.7 lb.ft.
2. Slide the armrest's pad onto the slide bars.
3. Fasten the four screws (A). Tightening torque: 7.2 lb.ft.
4. On PS armrest, attach the end cap (A) before pulling off the armrest
pad.
92
Figure 280. The armrest pad bracket in exploded view.
Figure 281. The armrest pad bracket in exploded view.
Figure 282. Loosen the screws.
Figure 283. Armrest pad removal.
Permobil M1