Permobil M1 Service Manual page 18

Repairs
8. Slide the top cover onto the chassis and at the same time press the
rear edge of it downwards to make sure it hooks onto the rear cover.
9. Attach the knob holding the cover and tighten it together with the
washer.
Removing fenders
1. Switch off the main power switch on the control panel.
2. Use a screwdriver or equivalent and carefully pry off the accent
cover.
18
Figure 21. Slide the top cover onto the chassis
Figure 22. The knob is located on the rear part of the
top chassis cover.
Figure 23. On/Off symbol depending on model.
Figure 24. Use a screwdriver or equivalent.
Figure 25. Pry off the accent cover carefully.
Permobil M1