Permobil M1 Service Manual page 64

Repairs
Removing ESP
1. Disconnect the control panel cable.
2. Disconnect the cable connecting the ESP and the ISM together.
3. Unscrew the screws securing the ESP.
Installing ESP
1. Screw in the screws securing the ESP. Tightening torque 0.22 lb.ft
64
Figure 183. The control panel cable and its connection
into the ESP.
Figure 184. The ISM cable its connection into the ESP
and the ISM.
Figure 185. The four screws securing the ESP.
Figure 186. The four screws securing the ESP.
Permobil M1