Chassis - Permobil M1 Service Manual

Repairs

Chassis

Covers
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 3 mm.
• Allen socket, 4 mm.
• Torx key, T-20.
• Pry off-tool (flat-blade screwdriver or equivalent).
Removing chassis covers
1. Use the control panel and tilt the seat to get access to cables and
screws. If the seat is fixed use the service mode position to lift the
seat. See page 111.
2. Use the control panel to raise the leg rest. For manual leg rest, pull
out the handle to raise the leg rest.
1. Switch off the main power switch on the control panel.
2. Unscrew the knob securing the top cover.
3. Slide the top cover off the chassis.
14
Figure 6. On/Off symbol depending on model.
Figure 7. The knob is located on the rear part of the top
cover.
Figure 8. Slide the top cover off.
Permobil M1