Permobil M1 Service Manual page 112

Repairs
7. Record the screw positions.
8. Lift off the upper part of the fixed seat.
Install upper part of fixed seat
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 3 mm.
• Allen socket, 4 mm.
• Socket 10 mm
• Means of documentation (camera, pen and paper etc.).
1. Lift the upper part of the fixed seat on to the lower part.
2. Fit and tighten bolt (A).
3. Attach leg rest. See page 102.
4. Attach seat frame. See page 95.
5. Attach backrest. See page 84.
6. Attach the seat plates. See Install seat plates , Page 96.
7. Attach the seat cushion by pushing it against the seat plate. Make
sure that the Velcro tape on the bottom side of the cushion is
attached to the seat.
Fixed seat, lower part
Remove fixed seat, lower part
The following tools are necessary for this task:
• Torque wrench.
112
Figure 338. Record the cable installation. Take a
photography or draw it.
Figure 339. Removing upper part.
Figure 340. Bolt (A) attaches the upper part.
Permobil M1