Permobil M1 Service Manual page 89

Permobil M1
4. If equipped with circlip, pin and the washer. Install circlip, pin and
the washer.
5. Install backrest. See Installing backrest , Page 86.
Manual backrest adjustment unit
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 5 mm.
• Socket, 10 mm.
WARNING!
Risk of injury while adjusting backrest
Do not place any weight or load on the backrest while adjusting the backrest.
Removing manual backrest adjustment unit
1. Loosen the two screws (D,E).
2. Remove circlip (A), pin (B) and the washer connecting to the
backrest frame.
3. Remove the manual backrest adjustment unit (C).
Figure 271. Pin, washer and circlip.
Figure 272. Remove manual backrest adjustment unit.
Repairs
89