Configuring Vlan Settings; Figure 8-4 Management - Radwin WinLink 1000 User Manual

Configuring VLAN Settings

Figure 8-4: Management Addresses - Site Configuration dialog box
4. Choose Management.
5. Enter the IP address of the ODU in the IP Address field.
If performing configuration from the RADWIN Manager, the IP address is
that entered from the Login window.
Note
6. Enter the Subnet Mask.
7. Enter the Default Gateway.
8. Enter the Trap Destination. This could be the IP address of the managing computer.
The events log will be stored at this address.
9. Click Apply to save the changes.
Configuring VLAN Settings
VLAN IDs are used by RADWIN products in three separate contexts:
Management VLAN, Traffic VLAN and Ethernet Ring. It is recommended that
you use different VLAN IDs for each context.
Caution
VLAN Management enables separation of user traffic from management traffic whenever such
separation is required. It is recommended that both sides of the link be configured with differ-
ent VLAN IDs for management traffic. (This reduces your chances of accidentally locking
yourself out of the link.)
WinLink 1000 User Manual Release 1.9.40
Chapter 8
8-6