Figure 4-5 Log On Window Exposing The User Types; Arameters; Table 4-2 User Types - Radwin WinLink 1000 User Manual

The RADWIN Manager log-on Concept
Figure 4-5: Log on window exposing the user types.
There are three user types:
• An Observer has read-only access to the link. An Observer can monitor the link, gen-
erate reports, but may not change any link parameters.
• An Operator can install and configure the link.
• An Installer can, in addition to functioning as an Operator, also change the operating
band. The latter function has legal ramifications, requiring familiarity with local regula-
tions.
The following table summarizes these options:
Table 4-2: User types, default passwords and function
Default
User Type
Password
Observer admin
Operator admin
Installer wireless
The Network Manager should change the default passwords as soon as possible.

Continuing the log-on procedure:
5. Type an IP address for the ODU (if you connect through a LAN), or click Local Con-
nection (if you are connected directly to the IDU port).
WinLink 1000 User Manual
Function Community
Monitoring Read-Only
Installation,
Read-Write
configuration
Operator plus
Read-Write
set band
Release 1.9.40
Community
String
public
netman
netman
Chapter 4
4-5