Ethernet Properties; Configuring The Bridge; Figure 8-12 Changed; Figure 8-13 Date Andt - Radwin WinLink 1000 User Manual

Ethernet Properties

Figure 8-12: Change Date and Time
If you used an NTP Server, you will see a window like this:
Figure 8-13: Date and Time configured from an NTP Server
8. Click OK to return to the Configuration dialog.
Ethernet Properties

Configuring the Bridge

Bridge configuration is required in various network topologies, such as protection (Ethernet
1+1) and ring applications. The bridge configuration parameters are located under the
Advanced tab of the Site Configuration dialog box:
WinLink 1000 User Manual Release 1.9.40
Chapter 8
8-15