BRS Link Activation
In accordance with 2.5 GHz standard, WinLink 1000-BRS links must be activated before use.
This is done at both ODUs independently before installation on site. Both ODUs must be con-
figured identically.
To Activate a BRS Link:
1. Install RADWIN Manager software as usual.
2. When the Manager Main Screen is displayed it appears with the Link Status label red
and showing Inactive. The Link Configuration and Link installation buttons are dis-
abled.
Figure 25-1: Inactive link state
3. Click Configuration |Configure Location
The Air Interface dialog box opens:
WinLink 1000 User Manual
BRS Installation
Procedure
Release 1.9.40
Chapter 25
25-1