Backup/Restore Of Odu Software Files; Backup Odu Software To A File; Restoring Odu Software Or Configuration - Radwin WinLink 1000 User Manual

Backup/Restore of ODU Software Files

To disable IDU Detection Mode, just toggle the check box in
Backup/Restore of ODU Software Files

Backup ODU Software to a File

RADWIN Manager allows you to backup the ODU software of both units of a link to the man-
aging computer as binary files. Each site is backed up in a separate file. Backup files are
matched to the MAC address of the site ODU. The default backup file name is constructed
from the ODU IP address and the date as in the following example:
Backup of Site A as used in our examples:
192.168.1.101_1.12.2009.backup
If you perform more than one backup on a given date you will need to change the file name
to something like this:
192.168.1.101_1.12.2009_00.backup
192.168.1.101_1.12.2009_01.backup
...

To backup the ODU software a file:
1. Choose a site to back up. The Site Configuration dialog box opens.
2. Click Backup.
3. In the Save As dialog box, indicate in which folder and under what name configura-
tion file is to be saved, and click Save.

Restoring ODU Software or Configuration

Backup files can be uploaded from the managing computer. You may choose a full software
restore or configuration-only restore.

To restore from a backup file:
1. Choose a site to restore (from a previous backup).
The Site Configuration dialog box opens.
2. Click Restore. You are offered the choice of a Full or Configuration Restore as
shown:
3. Click the required Restore type. You are then offered a standard Open File dialog
box.
WinLink 1000 User Manual Release 1.9.40
Figure 8-20.
Chapter 8
8-24