Functions On The Left Of The Dialog Box; Functions At The Top Of The Dialog Box; Figure 8-1 Configuration - Radwin WinLink 1000 User Manual

Editing the Configuration Parameters by Site
Figure 8-1: Configuration Dialog Box

Functions on the left of the dialog box:

System
Air Interface
Management
Inventory
Security
Date and Time
Advanced

Functions at the top of the dialog box:

Backup
Restore
Refresh
Installation Mode
WinLink 1000 User Manual
Edit the contact person and location details. View the system
details
View Link ID, installation frequency, channel bandwidth.
View HSS settings
Configure the IP address, Subnet Mask, Default Gateway, Trap
Destination and VLAN
View the hardware and software inventory (product
identification, versions, MAC address and serial number)
Change the Community Values and the Link Password. Set Link
Lock.
Set the date and time of the link from an NTP servers or from the
managing computer
Choose Hub or Bridge ODU mode, IDU aging time, set the
Ethernet ports configuration, set max. information rate, TDM
MHS status, set the external alarm inputs, restore factory
settings, set IDU detection mode.
Save the current ODU software to a file
Restore an ODU's software or configuration from a backup file
created by the backup facility
Refresh current panel with latest values
Return to Installation Mode for the entire link.
Selecting the Mute check box before clicking the Install Mode
button mutes the Beeper.
Release 1.9.40
Chapter 8
8-2