Gsu Preferences; Gsu Monitoring And Diagnostics; Gsu Telnet Support; Figure 11-14 Sitec - Radwin WinLink 1000 User Manual

GSU Preferences

GSU Preferences
The Preferences window adds a new tab for the GSU:
Figure 11-14: Site Configuration: Operations
You may chose the units for latitude/longitude coordinates.

GSU Monitoring and Diagnostics

The monitoring and diagnostic reports are similar to those of WinLink 1000.

GSU Telnet Support

To configure the GSU with Telnet, start a Telnet session, using
telnet <GSU_ipaddr>.
For example, if you run Telnet as follows,
telnet 192.168.222.20
you will be asked for a user name and password. You must log on with administrator privilege
under user name, admin and password netman.
The available commands are the same as for WinLink 1000 with the addition of four addi-
tional display commands and three additional set commands.
The additional display commands are
display rfp
display ratio
display tx_phase
display gpsinfo
The last one display gpsinfo, is the most interesting:
admin@192.168.222.20-> display gpsinfo
Current GPS time
WinLink 1000 User Manual
102941.000
Release 1.9.40
Chapter 11
11-12