Idu - Radwin WinLink 1000 User Manual

IDU

Management Application (per link)
Protocol
NMS
Operating Temperatures
Humidity
FCC/IC (cTUVus)
ETSI/IEC
FCC
ETSI
CAN/CSA
AS/NZS
IDU
The following specifications are for most part, common to both IDU-C and new style IDU-E
products. Differences are pointed out in the tables.
Number of ports
Max ports usable by WinLink 1000
Max ports usable by RADWIN 2000
Type
Framing
Timing
Connector
Standards Compliance
Line Code
Latency
Impedance
Jitter & Wander
Jitter Buffer
Clock Recovery Resolution
Clock stability
WinLink 1000 User Manual
RADWIN Manager
SNMP and Telnet
RADWIN NMS
ODU: -35°C to +60°C / -31°F to +140°F
ODU: Up to 100% non-condensing, IP67
UL 60950-1, UL 60950-22, CAN/CSA C22.2 60950-1, CAN/CSA C22.2 60950-22
EN/IEC 60950-1, EN/IEC 60950-22
47 CFR Class B, Part15, Subpart B
EN 300 386, EN 301 489-1, EN 301 489-4
CISPR 22-02
CISPR 22:2006
IDU-C
16, 8, 4 ports or no TDM ports.
4
16
E1/T1 configurable by RADWIN Manager
Unframed (transparent)
Independent timing per port, Tx and Rx
RJ-45
ITU-T G.703, G.826
E1: HDB3 @ 2.048 Mbps, T1: B8ZS/AMI @ 1.544 Mbps
Configurable 5-20 msec
E1: 120Ω, balanced, T1: 100Ω, balanced
According to ITU-T G.823, G.824
Jitter Buffer configuration enabling a latency from 5msec to 16msec for
interference immunity confront
0.05ppb
20ppm as clock master (crucial for wander requirements of cellular operators)
Release 1.9.40
Appendix A
IDU-E
2 or no TDM port
2
2
A-3