Changing The Link Password - Radwin WinLink 1000 User Manual

Installation
Figure 5-3: Installation Wizard, System dialog box filled out
5. Click Next.
The default link with a rate of 6.5 Mbps is evaluated.
The Channel Setting dialog box appears. Proceed to

Changing the Link Password

The default password is wireless-bridge. Optionally, you can change the link password as
explained here.

To change the link password:
1. Click the Change button in the System dialog box.
The Change Link Password dialog box opens.
Use the Hide characters check box for maximum security
Note
WinLink 1000 User Manual Release 1.9.40
Channel Settings, below.
Chapter 5
5-5