Bdu Package Contents; External Antenna Package Contents; Additional Tools And Materials Required; Tools And Materials - Radwin WinLink 1000 User Manual

BDU Package Contents

BDU Package Contents
Figure 3-9: RADWIN BDU
• BDU
• 19" rack mounting kit - see
• DC power plug for power cable

External Antenna Package Contents

• Antenna
• RF cable 1m (3') long; two cables supplied with bipolar antennas, single cable sup-
plied with monopolar antennas
• Mounting kit

Additional Tools and Materials Required

The following is a list of the equipment and materials required to install WinLink 1000 hard-
ware.

Tools and Materials

• Crimping tool for RJ-45 (if the ODU-IDU cable is without connectors)
• Spanner/wrench 13 mm (½")
• Drill (for wall mounting only)
• Cable ties
• Sealing material

Cables and connectors

• ODU grounding cable 12AWG
• IDU grounding cable 18AWG
• ODU-IDU cable (outdoor class, CAT-5e, 4 twisted pairs, 24AWG)
• For PoE based links: A crossed Ethernet LAN cable
• O-PoE 10AWG grounding cable if applicable
• BDU grounding cable 18AWG if applicable

Hardware Installation Sequence

The following steps are required to install the WinLink 1000 system:
1. Mounting the ODUs, page
WinLink 1000 User Manual
Figure 3-7
page 3-8.
Release 1.9.40
Chapter 3
3-6