Link Budget Calculator
Overview
The Link Budget Calculator is a utility for calculating the expected performance of the WinLink
1000 wireless link and the possible configurations for a specific link range.
The utility allows you to calculate the expected RSS of the link, and find the type of services
and their effective throughput as a function of the link range and deployment conditions.
User Input
You are required to enter or choose the following parameters. Depending on the product,
some of the parameters have a default value that cannot be changed.
•
Band, which determines frequency and regulation
•
Channel Bandwidth
•
Tx Power (maximum Tx power per modulation is validated)
•
Antenna Type (cannot be changed for ODU with integrated antenna)
•
Antenna Gain per site (cannot be changed for integrated antenna)
•
Cable Loss per site (cannot be changed for integrated antenna)
•
Required Fade Margin
•
Rate (and Adaptive check box)
•
Service Type
•
Required Range
Link Budget Calculator Internal Data
For each product (or Regulation and Band) the calculator stores the following data required
for link budget calculations:
•
Maximum Transmit power (per modulation)
•
Receiver Sensitivity (per modulation) for Ethernet service and for TDM services at var-
ious BER
•
Maximum linear input power (used to calculate minimum distance)
•
Antenna gain and cable loss for ODU with integrated antenna
•
Available Channel Bandwidths
WinLink 1000 User Manual
Release 1.9.40
Chapter 21
21-1