Figure 7-7 Choosing An - Radwin WinLink 1000 User Manual

Configuration
Figure 7-6: Channel frequency options
Selecting one of the frequencies presented returns you to the status of
appropriate change. If you choose Other..., the following window opens:
Figure 7-7: Choosing an "Other" Operating Channel frequency
The right hand drop-down list (showing the current Operating Channel) allows you to fine-
tune the frequency in increments of ±5MHz within a range of the operating band, which in
this example is 5.740 - 5.835GHz.
WinLink 1000 User Manual Release 1.9.40
Chapter 7
Figure 7-5 with the
7-7