Configuration
Configuration
Since configuration functionality is included in the installation, we will briefly review the main
steps and for most part offer references to the corresponding installation step.
Step 1, Start the Wizard
In the tool bar of the RADWIN Manager main window, click the Link Configuration button.
The Link Configuration button is only accessible on a fully installed link as set out in
5.
The Configuration Wizard opens:
Figure 7-1: Link Configuration Wizard
Click Next to proceed with the configuration procedure.
Step 2, System Parameters
The System dialog box opens:
WinLink 1000 User Manual
Release 1.9.40
Chapter 7
Chapter
7-3