Radwin WinLink 1000 User Manual page 324

MIB Parameters
Table D-2: Private MIB Parameters (Sheet 17 of 18)
Name
winlink1000IduTdmCurrentTxClock
winlink1000IduTdmCurrentBlocksHigh
winlink1000IduTdmRemoteQual
winlink1000IduTdmRemoteQualEval
winlink1000IduTdmSrvEval
winlink1000IduTdmBackupAvailableLinks
winlink1000IduTdmBackupTable
winlink1000IduTdmBackupEntry
winlink1000IduTdmBackupIndex
winlink1000IduTdmBackupMode
winlink1000IduTdmBackupCurrentActiveLink
winlink1000IduTdmJitterBufferSize
winlink1000IduTdmJitterBufferDefaultSize
winlink1000IduTdmJitterBufferMinSize
winlink1000IduTdmJitterBufferMaxSize
winlink1000IduTdmJitterBufferSizeEval
winlink1000IduTdmType
winlink1000IduTdmTypeEval
winlink1000IduTdmLineStatusStr
winlink1000IduTdmHotStandbySupport
winlink1000IduTdmDesiredHotStandbyMode
winlink1000IduTdmHotStandbyOperationStatu
s
winlink1000IduTdmBackupLinkConfiguration
winlink1000GeneralTrapDescription
winlink1000GeneralTrapSeverity
winlink1000GeneralCookie
winlink1000GeneralEcChangesCounter
WinLink 1000 User Manual
OID
1.3.6.1.4.1.4458.1000.2.6.7.1.103
1.3.6.1.4.1.4458.1000.2.6.7.1.104
1.3.6.1.4.1.4458.1000.2.6.8
1.3.6.1.4.1.4458.1000.2.6.9
1.3.6.1.4.1.4458.1000.2.6.10
1.3.6.1.4.1.4458.1000.2.6.11
1.3.6.1.4.1.4458.1000.2.6.12.1.1
1.3.6.1.4.1.4458.1000.2.6.12.1.2
1.3.6.1.4.1.4458.1000.2.6.12.1.3
1.3.6.1.4.1.4458.1000.2.6.13
1.3.6.1.4.1.4458.1000.2.6.14
1.3.6.1.4.1.4458.1000.2.6.15
1.3.6.1.4.1.4458.1000.2.6.16
1.3.6.1.4.1.4458.1000.2.6.17
1.3.6.1.4.1.4458.1000.2.6.18
1.3.6.1.4.1.4458.1000.2.6.19
1.3.6.1.4.1.4458.1000.2.6.20
1.3.6.1.4.1.4458.1000.2.6.21
1.3.6.1.4.1.4458.1000.2.6.22
1.3.6.1.4.1.4458.1000.2.6.23
1.3.6.1.4.1.4458.1000.2.6.24
1.3.6.1.4.1.4458.1000.100.1
1.3.6.1.4.1.4458.1000.100.2
1.3.6.1.4.1.4458.1000.100.3
1.3.6.1.4.1.4458.1000.100.4
Release 1.9.40
Type Description
Integer RW TDM Transmit Clock. A change is effective after
re-activation of the TDM service.
Counter RO High part of the 64 bits counter Current Blocks
Integer RO Estimated average interval between error second
events.
value of -1 is used to indicate an undefined state.
Integer RO Estimated average interval between error second
events during evaluation process. The valid
values are 1-2^31 where a value of -1 is used to
indicate an undefined state.
Integer RW Evaluated TDM service bit mask. Setting this
parameter to value that is bigger than the activated
TDM service bit mask will execute the evaluation
process for 30 seconds. Setting this parameter to
0 will stop the evaluation process immediately.
Integer RO Number of TDM backup trunks.
N/A IDU TDM Links Statistics table.
N/A IDU TDM Links Statistics table entry. INDEX {
winlink1000IduTdmBackupIndex }
Integer RO Table index.
Integer RW TDM backup mode: Enable or Disable where the
main link is the air link or the external link.
Changes will be effective immediatly.
Integer RO TDM backup current active link: N/A
active or external link is active.
Integer RW TDM Jitter Buffer Size.
between the minimum and the maximum TDM
Jitter Buffer Size.
millisecond.
Integer RO TDM Jitter Buffer Default Size. The units are 0.1 x
millisecond.
Integer RO TDM Jitter Buffer Minimum Size. The units are 0.1
x millisecond.
Integer RO TDM Jitter Buffer Maximum Size. The units are 0.1
x millisecond.
Integer RW TDM Jitter Buffer Size for evaluation.
must be between the minimum and the maximum
TDM Jitter Buffer Size.
millisecond.
Integer RW TDM Type (The value undefined is read-only).
Integer RW TDM Type for evaluation.
DisplayString RO Line status.
Integer RO Indicates if Hot Standby is supported.
Integer RW Desired Hot Standby Mode.
Integer RO The Link Actual Status.
Integer RW The current configuration of the backup link.
DisplayString RO Trap's Description. Used for Trap parameters.
Integer RO Trap's Severity. Used for Trap parameters.
DisplayString RW Reserved for the Manager application provided
with the product used for saving user preferences
affecting ODU operation.
Integer RO This counter is initialized to 0 after a device reset
and is incremented upon each element constant
write operation via SNMP or Telnet.
Appendix D
The valid values are 1-2^31 where a
air link is
The value must be
The units are 0.1 x
The value
The units are 0.1 x
D-22