Antenna Characteristics; Table A-1 Antennas - Radwin WinLink 1000 User Manual

Antenna Characteristics

FCC
ETSI
CAN/CSA-CEI/IEC
AS/NZS
Antenna Characteristics
An antenna is the radiating and receiving element from which the radio signal, in the form of
RF power, is radiated to its surroundings and vice versa. The transmission range is a function
of the antenna gain and transmitting power. These factors are limited by country regulations.
The WinLink 1000 may be operated with an integrated antenna attached to the ODU unit, or
with an external antenna wired to the ODU via a N-type connectors. All cables and connec-
tions must be connected correctly to reduce losses. The required antenna impedance is 50Ω.
Table A-1: Antenna Specifications
Frequency bands
Freq range
2.3 2.4
GHz
GHz GHz
2.40-2.70
2.30-2.70 √
4.94-6.00
5.15-5.875
4.90-5.35
5.15-6.02
2.7-2.9
5.72-5.85
5.725-5.850
5.470-5.725
4.90-5.10
4.90-6.00
5.250-5.35
5.470-5.725
2.50-2.70
WinLink 1000 User Manual
Designed to meet 47 CFR Class B, Part15, Subpart B
Designed to meet EN 300 386 V1.3.3; EN 301 489-4 V1.3.1; EN 301 489-1
Designed to meet CISPR 22-02
Designed to meet CISPR22: 2006 Class B
2.5 2.7 4.9 5.3
GHz GHz GHz GHz
√
√
√
√
√
√
√
√
√
√ √
√
√
5.4 5.8 5.9 6.0
GHz GHz GHz GHz
√ √ √
√ √
√ √ √ √
√
√
√
√ √ √ √
√
Release 1.9.40
Appendix A
Form Gain
Type
factor dBi
Integrated Flat panel 16
Integrated Flat panel 17.5
18.5
Integrated Flat panel
22
External Flat panel 18
External Flat panel 21
22
External Flat panel
28
External Flat panel 17
External Dish 29
External Dish 32
External Dish 31.5
External Dish 27
External Dish 29
External Dish 31
External Dish 31.5
External Grid 24
Dimen-
Beam
sions
width
ft
20 1
25 1
10° 1
18° 1
9 1
9 1
4.5 2
° 1
6° 2
6° 3
4 3
8° 2
8° 2
5° 3
4 3
E:13
2 x 3
H:9
A-7