Idu Grounding; External Lightning Surge Suppressors And Grounding - Radwin WinLink 1000 User Manual

IDU Grounding

IDU Grounding
The IDU's grounding post should be connected to the internal ground point, using a ground-
ing wire of at least 10 AWG. The grounding wire should be connected to a grounding rod or
the building grounding system.
The device should be permanently connected to ground.

External Lightning Surge Suppressors and Grounding

A Grounding Kit and Surge Arrestor Unit must be located near the ODU and properly
grounded as illustrated in Figures
WinLink 1000 User Manual
18-2 and 18-3 below:
Release 1.9.40
Chapter 18
18-3