TDM Loopbacks
Figure 9-5: Loopback defined
5. Click OK to activate the selected loopback(s).
This activates selected loopback(s). The corresponding service port icon
changes color and appearance to indicate an active loopback.
Figure 9-6: Site A port 2 set to loopback
To deactivate a loopback:
• Return to the situation of
When a loopback is deactivated, the corresponding icon in
reverts to its previous state (like the right side of the figure).
WinLink 1000 User Manual
Figure 9-4
and click None.
Release 1.9.40
Chapter 9
Figure 9-6
9-5