Figure 15-1 Softwareu; Figure 15-2 Add Site Options; Figure 15-3 A - Radwin WinLink 1000 User Manual

Upgrading an Installed Link
Figure 15-1: Software Upgrade Utility - Main window
The default sites shown in the Software Upgrade list panel belong to the currently
link. The list may be empty if you are running the RADWIN Manager "offline".
What follows about adding sites manually or from a list file, assumes that all
sites to be upgraded are of the same type - either WinLink 1000 or RADWIN
2000. but not both. This will not work with a mixed list.
Warning
2. Click Add Site to add additional sites for upgrade.
Figure 15-2: Add site options
Click Add Single Site for one site only:
Figure 15-3: Adding a single site for upgrade
WinLink 1000 User Manual Release 1.9.40
Chapter 15
15-2