Tdm Loopbacks; Table 9-2 Link Compatibility - Radwin WinLink 1000 User Manual

TDM Loopbacks

window. Trap messages (can be viewed in the Events Log) indicate the problems or limita-
tions and suggest upgrades when appropriate.
The following Link Status messages are given:
fullCompatibility - different software versions were detected that are fully compatible. The
message indicates that an upgrade is available.
restrictedCompatibility
However, new features are not supported.
softwareUpgradeRequired
tion. The message is, that a software upgrade is required.
versionsIncompatibility
need to perform local upgrades.
Table 9-2: Link Compatibility Trap Messages
Link State
fullCompatibility
restrictedCompatibility
softwareUpgradeRequired
versionsIncompatibility
TDM Loopbacks
Internal and external loopbacks on both sites of a link are used to test the TDM
connections

To activate a loopback:
1. From the Maintenance menu, choose Loopbacks... or right-click the TDM
display in the main window.
The Loopbacks dialog box appears:
WinLink 1000 User Manual
- different software versions were detected that operate correctly.
- different software versions were detected allowing limited opera-
- different software versions were detected that are incompatible. You
Link State Link Status
text Color
Active Green
Active - Magenta
Software (Same as
Version authenticatio
mismatch n error)
Active –
Software Brown
Upgrade (Major)
Required
Not Active -
Software
Red
Upgrade
Required
Release 1.9.40
Site Description
Software Upgrade
Available
Software Upgrade
Recommended
Software Upgrade
Required
Local Software
Upgrade Required
Chapter 9
9-3