Outdoor Installation; Preparing The Odu Before Deployment; Figure 3-10 Typical Installation - Radwin WinLink 1000 User Manual

Outdoor installation

2. Mounting the external antennas (if used), page
3. Mounting the Lightning Protection devices (if used), page
4. Outdoor connections, page
5. Mounting the IDUs, page
6. Indoor connections, page
7. Aligning the ODUs/antennas, page
See Figure 3-10 below, which illustrates a typical installation of a RADWIN 2000 or a Win-
Link 1000 with external antenna(s).
Figure 3-10: Typical Installation (with external antenna) Left: RADWIN 2000 Right: WinLink
1000
The installation steps are detailed in the following sections.
Outdoor installation

Preparing the ODU before Deployment

Each ODU must be pre-loaded with an IP address. This may be done prior to deployment in
the field, or on-site using a Laptop computer. The process is quite straight-forward and
described in Chapter
WinLink 1000 User Manual
page 3-9.
page 3-10.
page 3-13.
page
19.
Release 1.9.40
page 3-8.
page
3-14.
Chapter 3
3-9.
3-7