Radwin WinLink 1000 User Manual page 101

Elements of the RADWIN Manager Main Window
• Estimated Ethernet Throughput: The numbers are the current calculated
throughputs at each site. The colored bars (with numbers) indicate the maximum
possible throughput having regard for air conditions.
• Rx and Tx Rates: The Rx and Tx rates are the receive and transmit rates on the
LAN side of each ODU, not the air side. For a balanced link, the Rx and Tx rates
at the LAN side of Site A will match the Tx and Rx rates at the LAN side of Site B
respectively. In all cases, The LAN side Rx rate shown will be the same as the air
side Tx rate for each individual ODU.
Actual Ethernet traffic received and transmitted rates per site, is in Mbps of Fps,
selectable in the panel title bar.
• TDM Services: IDU-C and new style IDU-E:
• The title bar enables you to switch between Accumulative and Current view.
• Immediately below the title bar is displayed the Estimated Time Between Errors.
It is zeroed by the Clear Counters button in the tool bar.
• Error block count is shown immediately above the active TDM channels display.
• The color of the TDM ports reflects their current status:
• TDM Services: IDU E/R
• For each Trunk the line status and Error block count is displayed. It is zeroed by
the Clear Counters button in the tool bar. The line status is color coded and
may be one of:
• Frequency box: It shows the link frequency. The color of the box indicates the status
WinLink 1000 User Manual
• Green - Operational
• Red - Error: LOS for loss of signal and AIS for Alarm Indi-
cation Signal
• Yellow - Loopback
• Gray - Inactive
• Green - Normal
• Red - Error: LOS for loss of signal and AIS for Alarm Indi-
cation Signal
• Yellow - loopback
Release 1.9.40
Chapter 6
6-6