Installation
3. Click the required parameter. Their meanings are as follows:
Please keep in mind that what follows is per port.
Note
Figure 5-20: TDM Parameters
Transparent/Transparent
Loop time/Recover
Recover/Loop time
Internal/Recover
WinLink 1000 User Manual
The clock at Site A regenerates the clock from Site B and
vice versa.
The Site A port receive-clock is used as the transmit-clock
for that port on both sides of the link.
The Site B port receive-clock is used as the transmit-clock
for that port on both sides of the link.
Release 1.9.40
Chapter 5
5-17