The Link Budget Calculator; Performance Monitoring; The Monitor Log; Saving The Monitor Log - Radwin WinLink 1000 User Manual

The Link Budget Calculator

A message box asking if you want to enter install mode appears.
3. Click Yes to continue.
The system enters Install mode and the alignment tone becomes audible.
4. Realign the ODUs and start the Installation wizard (see
The Link Budget Calculator
The Link Budget Calculator is part of the RADWIN Manager software and is found in the Help
menu. This useful utility enables you to calculate the expected performance of the wireless
link and the possible configurations for a specific link range including antenna size, cable loss
and climate conditions. For full details, see

Performance Monitoring

WinLink 1000 Performance Monitoring constantly monitors traffic over the radio link and col-
lects statistics data for the air interface, TDM and Ethernet ports. It does so continuously,
even when the RADWIN Manager is not connected.
Two types of logs are recorded:
• Monitor Log that records statistics on traffic rate and radio signal strength.
• Events Log that records when the rates fall above or below a predefined threshold.
See page 9-13
Both the statistics Monitor log and events log can be saved as text files.

The Monitor Log

The Monitor Log records performance statistics for predefined intervals. You can save the
monitor log to a text file, as well as display the information in an on-screen report.

Saving the Monitor Log

You can save the recorded Monitor Log statistics to a text file.

To save the monitor log:
1. From the Tools menu, choose Preferences.
The Preferences dialog box appears:
WinLink 1000 User Manual
Chapter
below.
Release 1.9.40
Chapter
21.
Chapter 9
5).
9-8