Radwin WinLink 1000 User Manual page 132

VLAN Tagging for Ethernet Service: Configuration
VLAN IDs are used by RADWIN products in three separate contexts:
Management VLAN, Traffic VLAN and Ethernet Ring. It is recommended that
you use different VLAN IDs for each context.
Caution
To set up VLAN tagging for Ethernet Service, click the VLAN Configuration... button in
Figure 8-14. The following window is displayed:
Figure 8-15: VLAN tag settings
If you are using a new style IDU-E, the SFP row will not appear.
Note
The choices for Ingress Mode are -
and for Egress Mode are -
WinLink 1000 User Manual Release 1.9.40
Chapter 8
8-18