Vlan Availability; Vlan Configuration Using The Radwin Manager - Radwin WinLink 1000 User Manual

VLAN Availability

Table 14-2: Port settings - Egress direction (Continued)
With Provider tagging, the system double-tags egress frames towards the provider's network. All
frames are tagged QinQ with a VLAN ID, which is configured by the service provider (Provider VLAN
ID).
Provider
With this setting, ingress frames which are not tagged with the configured Provider VLAN ID are
tagging
blocked (filtered).
Note: Each port can be configured independently to a tagging mode. However, only a single Provider
VLAN ID can be defined per IDU.
This setting functions like Provider tagging. However, all ingress frames are passed through.
Provider
tagging without
filter
VLAN Availability
VLAN is available for links using either WinLink 1000 or RADWIN 2000 radios. VLAN support
requires the use of IDU-Cs or new style IDU-Es.

VLAN Configuration Using the RADWIN Manager

VLAN IDs are used by RADWIN products in three separate contexts:
Management VLAN, Traffic VLAN and Ethernet Ring. It is recommended that
you use different VLAN IDs for each context.
Caution
If you are not a VLAN expert, please be aware that incorrect VLAN
configuration may cause havoc on your network. The facilities described
below are offered as a service to enable you to get best value from your
WinLink 1000 links and are provided "as is". Under no circumstances does
Disclaimer
RADWIN accept responsibility for network system or financial damages
arising from incorrect use of these VLAN facilities.
WinLink 1000 User Manual Release 1.9.40
Chapter 14
14-5