Mounting An External Antenna; Mounting A Connectorized Odu Horizontally; Figure 17-6 Mounted; Figure 17-7 I - Radwin WinLink 1000 User Manual

Mounting an External Antenna

Mounting an External Antenna
Optional external antennas can be mounted on a pole. The external mounting kit varies
according to the specific antenna model.

Mounting a Connectorized ODU Horizontally

What follows applies to both WinLink 1000 and RADWIN 2000 with obvious differences.
An ODU may be mounted horizontally as shown in

To mount an ODU horizontally, observe the following cautions:
1. To ensure your warranty rights for horizontally installed ODUs, make sure that the
four ports ANT1, ANT2, HSS and ODU are firmly secured or moisture sealed with the
supplied caps.
2. Further, ensure that cables are connected using a "water nose" as shown in
Figure 17-6.
Figure 17-6: Mounted ODUs with correct "water nose"
Do not do this:
Figure 17-7: Incorrectly mounted ODU (No "water nose")
3. If you attach an external PoE device near the ODU, the same considerations apply.
WinLink 1000 User Manual
Figure 17-6.
Release 1.9.40
Chapter 17
17-4