Figure 15-6 S; Figure 15-7 S - Radwin WinLink 1000 User Manual

Upgrading an Installed Link
5. To back up your existing system, check Backup device software check-box. Then
click the
ments directory on the managing computer or the last backup directory you used.
The backup here is the same as that in
purpose. It provides a fallback if the upgrade proves problematic.
Note
6. In addition to the previous step, you may opt to perform a delayed upgrade. Check
the Delayed Upgrade box, and enter the date and time for the delayed upgrade.
7. The radio buttons on the right determines how your sites should be reset. Bear in
mind that on the one hand, a reset involves a service interruption, but on the other
hand, the software upgrade will not become effective until after the reset is carried
out.
8. Click Start Upgrade to commence the process. For an immediate upgrade you will
be able to observe the upgrade progress from the green progress bars:
Figure 15-6: Software upgrade in progress - Note the stop button
Figure 15-7: Software upgrade completed successfully
9. Click Close to exit.
10. If you requested a delayed upgrade, a notice like this will appear in the SWU title
bar:
WinLink 1000 User Manual
button for a standard file dialog. The default location is the My Docu-
Release 1.9.40
page 8-32, and serves the same
Chapter 15
15-4