Performance Monitoring Report Toolbar; Setting Air Interface Thresholds - Radwin WinLink 1000 User Manual

Broadband wireless
Hide thumbs Also See for WinLink 1000:
Table of Contents

Advertisement

The Monitor Log
Table 9-3: Explanation of performance data
Data type
Additional Air Interface
PM Data
Additional Ethernet
Interface PM Data
TDM interface

Performance Monitoring Report Toolbar

You can use the toolbar to perform the actions described in the following table:
Table 9-4: Action of the toolbar buttons
Command Button
Get Data
Save
Clear
Thresholds
Selection Pane
Close

Setting Air Interface Thresholds

Use the Thresholds button on the Monitoring Performance Report toolbar to set the Air
Interface Thresholds:
WinLink 1000 User Manual
Reported Value
Max RSL
Min RSL
Max TSL
Min TSL
RSL Threshold 1
RSL Threshold 2
TSL Threshold
BBER Threshold
Received Bytes
Transmitted Bytes
Throughput threshold
Traffic threshold
Active seconds
Action
Gather current performance monitoring data.
Save current performance monitoring data to a file
Clear current performance monitoring data
Set Thresholds
Toggle on/off left panel
Closes the Performance Monitoring window
Release 1.9.40
Explanation
The maximum of the receive signal level (measured in dBm).
The minimum of the receive signal level (measured in dBm).
The maximum of the transmit signal level (measured in dBm).
The minimum of the transmit signal level (measured in dBm).
The number of seconds in which the Receive Signal Level (RSL)
was below the specified threshold.
The number of seconds in which the RSL was below the
specified threshold.
The number of seconds in which the Transmit Signal Level
(TSL) was above the specified threshold.
The number of seconds in which the Background Block Error
Ratio (BBER) exceeded the specified threshold.
The number of Megabytes received at the specified port within
the interval
The number of Megabytes transmitted at the specified port
within the interval.
Seconds count when throughput fell below the threshold
Seconds count when actual traffic exceeded the threshold
The number of seconds that the configured TDM services are
active
Chapter 9
9-12

Advertisement

Table of Contents
loading

Table of Contents