Disk Handling Instructions - Fujitsu Eternus DX60 S2 User Manual

Hide thumbs Also See for Eternus DX60 S2:
Table of Contents

Advertisement

Chapter 5 Installing Optional Products
5.1 Installing Disks
5.1.3

Disk Handling Instructions

About condensation
About static electricity
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Do
CAUTION
When moving a disk from a cold place, such as an un-conditioned
store house in winter, to a warmer places such as an air-conditioned
room, the severe temperature change may result in condensation
forming.
To avoid this, allow the packed disks sufficient time in the warmer
place (one hour for each 15°C of temperature difference) to adapt to
the new temperature.
Do Not
CAUTION
Do not touch the surface of the board of the disks.
Do
When handling disks, make sure to wear a wrist strap or touch a metal
part to discharge the human body's natural static electricity. Failure to
discharge static electricity may cause device failure.
Leave the disk in its package until ready to install it.
Copyright 2011 FUJITSU LIMITED
57
P3AM-5512-02ENZ0

Advertisement

Table of Contents
loading

Table of Contents