Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)
3.5.7.3
Releasing and Replacing Magazines
This page allows the user to release the right or left magazine from the library.
Figure 3.35 ETERNUS LT40 S2: Operations, Magazines page
To manually release a magazine, see section
However, this manual process should only be used if the magazine cannot be released using the Operator
Control Panel or the Remote Management Unit.
3.5.8
Service
3.5.8.1
Performing General Library Diagnostics
This page provides the system administrator with general tests to verify the usability and reliability of the
library. The user selects the number of test cycles before starting the test. To cancel the test before it
completes the cycles, select the Stop button.
Figure 3.36 ETERNUS LT40 S2: Service, General Diagnostic page
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
"4.4 Magazine Does not Unlock via OCP or RMU" (page
67
Copyright 2018 FUJITSU LIMITED
77).
P3AM-5392-07ENZ0