Fast Options; Table 1-2. Fast Options And Required Configurations - Comtech EF Data SDM-300A Installation And Operation Manual

Introduction
1.2.1

FAST Options

The modem has a variety of hardware options available as shown in Table 1-2. Hardware
options are available through conventional means as well as through Aaptive
Broadband's FAST system. OQPSK mode is available through the FAST feature. For
detailed descriptions of the FAST feature and all options, refer to Appendix A.
Note: EFData has included a DEMO Mode in the Utility Menu. This feature will allow
the operator to experience any of the FAST options. This feature has a 60-minute time
limit, after which, the unit will return to its previous configuration.
H ARD WARE
Basic Platform S DM -300A
FA ST O ption s
FA ST O ption s with
R eed-Solomon Ha rdw are
FA ST O ption s with
O verhead Hardw are
FA ST O ption s with
R eed-Solomon and
O verhead Hardw are
Mu x
Fle x M ux
Notes:
1. The basic modem is shipped with either Sequential or Viterbi decoder.
2. The overhead interface card and a compatible relay adapter card (connector personality card) are
required for this option. Refer to Table 1-3 for the applicable part numbers.
1–8

Table 1-2. FAST Options and Required Configurations

X
X
(Note 1)
X X X
X
(Note 1)
X
X X
X
X
SDM-300A Satellite Modem
X X X
(Note 2) (Note 2) (Note 2)
X X X
X
(Note 2)
X
(Note 2)
X
(Note 2)
X
(Note 2)
Rev. 4