Data I/O Interface Connector (J8) Removal/Installation; Table 2-8. Connector (J8) Matrix - Comtech EF Data SDM-300A Installation And Operation Manual

Installation
2.3.3.1

Data I/O Interface Connector (J8) Removal/Installation

Note: The following procedures outline the removal and installation of the Data I/O
connector (J8). These procedures are written with the assumption that the same
configured connector will be reinstalled. However, the operator does have an option to
install a different configured connector. Refer to Table 2-8 for a matrix explaining
connector options.
Modem Configuration
25-pin Connector
34-pin Connector
37-pin Connector
50-pin Connector
50-pin Connector (Optional)
2–14

Table 2-8. Connector (J8) Matrix

EIA-232 EIA-422/EIA449
X
X
X
SDM-300A Satellite Modem
V.35 Overhead
X X
X
X
X X X
X X
Rev. 4