Table of Contents
Advertisement
Operation
Press [↑] or [↓] to change the parameters. After the display represents the correct
parameters, press [ENTER] to execute the change. This action initiates the necessary
programming by the modem.
To undo a parameter change prior to execution, press [CLEAR].
Notes:
1. Figure 3-4 through Figure 3-22 list the front panel menu window selections.
2. EFData recommends that selection of the desired Modem Type be made prior to
3. Menus or commands that are specific to certain modem configurations are only
4. All of the windows are accessible in the Custom mode. Take caution not to select
3–6
making any other setting. This procedure is located in the Utility Modem Type
menu.
accessible after selecting the appropriate modem configuration. This prevents
incompatible parameters from accidentally being selected.
incompatible parameters, as the modem does not shut out incompatible command
choices in the Custom mode.
SDM-300A Satellite Modem
Rev. 4
Advertisement
Table of Contents
