Table of Contents
Advertisement
SDM-300A Satellite Modem
3.3.13
Utility
The Function Select Utility menu is divided into the following categories:
•
•
•
•
•
•
Refer to through Figure 3-22 for different menu categories. The menu information
includes:
•
•
•
•
•
•
•
•
•
•
•
Provisions are also made for assigning data and code rates to the modulator and
demodulator.
After entering the Utility menu, press [←] or [→] to select the desired sub-menu, and
press [ENTER].
Notes:
1. The Utility Factory Setup menu is for EFData service personnel only. Entering
2. Changes in the Utility menu may cause changes in other front panel menus.
Rev. 4
Modulator
Demodulator
Interface
System
Modem Type
Factory Setup
Filter Types
Terrestrial Interface Types
Mod/Demod Types
Time/Date
Encoder/Decoder Types
Modem Types
Current Firmware
Test Mode Status
Overhead Type
Revision Emulation
Lamp Test
this menu without authorization may cause the modem to operate incorrectly.
Operation
3–49
Advertisement
Table of Contents
