Table of Contents
Advertisement
Operation
ENCODER TYPE
TX BPSK ORDERING
MOD SPECTRUM
TX-RS INTERLEAVE
TX IESS-310 MODE
TX SYMBOL RATE
3–52
Encoder type selection. Select Viterbi or Sequential encoder type.
Note: Change in EFD, ASYNC, or Custom modem types only
Press[←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change.
Transmit BPSK bit ordering selection. Select STANDARD or NON-STANDARD
Press[←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change
Programmable vector rotation allows the operator to select NORMAL or INVERT for
spectrum reversal of the I and Q baseband channels.
Press[←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change
Selection of 4, 8, or 16 deep.
Press[←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change
Selection of 8PSK 2/3 with Reed-Solomon.
Press[←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change
Status only.
Selects TX Symbol Data rate within 4.8 to 2500 ksps.
SDM-300A Satellite Modem
Rev. 4
Advertisement
Table of Contents
