Table of Contents
Advertisement
SDM-300A Satellite Modem
Bulk
Command:
Consol.
Response:
Analog
Status
Where 'pn' is the last parameter returned.
Parameter
Number
1
2
3
4
5
6
Note: Parameters 2 through 6 are dependent on carrier acquisition, if the decoder is not locked empty data blocks are returned
(,,,,,).
Rev. 4
<add/BCAS_'cr'
>add/BCAS_p1,p2,p3, . . . pn'cr''lf']
Parameter Name
(Command Reference)
Receive Signal Level
(ref. 'RSL_' command).
Raw BER
(ref. 'RBER_' command).
Corrected BER
(ref. 'CBER_' command).
Interface Read Error Status
(ref. 'IRES_' command).
EB/N0
(ref. 'EBN0_' command).
Buffer Fill Status
(ref. 'IBFS_' command).
This command is similar to the 'BCS_' command, but
returns modem analog parameters. Additional status of new
options and features will always be appended to the end.
Description
p1 = xsnn.n, receive signal level in dBm.
p2 = xm.mE-ee.
p3 = xm.mE-ee.
p4 = tttt_xm.mE-ee.
p5 = xnn.n, EB/N0 in dB.
p6 = nn%, buffer fill status.
Remote Control Operation
B–37
Advertisement
Table of Contents
