Comtech EF Data SDM-300A Installation And Operation Manual page 288

Hide thumbs Also See for SDM-300A:
Table of Contents

Advertisement

SDM-300A Satellite Modem
ASYNC
Command:
Transmit
Response:
Overhead
Channel
Status:
Parity
Response:
ASYNC
Command:
Receive
Response:
Overhead
Channel
Status:
Parity
Response:
ASYNC
Command:
Transmit
Response:
Communica
-
Status:
tions Type
Response:
ASYNC
Command:
Receive
Response:
Communica
-
Status:
tions Type
Response:
Transmit
Command:
Data Phase
Response:
Status:
Response:
Receive
Command:
Data Phase
Response:
Status:
Response:
CTS Delay
Command:
Time
Response:
Status:
Response:
IDR
Command:
Transmit
Response:
ESC Type
Status:
Response:
IDR
Command:
Receive
Response:
ESC Type
Status:
Response:
Rev. 4
<add/TOCP_xxxx'cr'
>add/TOCP_xxxx'cr''lf']
<add/TOCP_'cr'
>add/TOCP_xxxx'cr''lf']
<add/ROCP_xxxx'cr'
>add/ROCP_xxxx'cr''lf']
<add/ROCP_'cr'
>add/ROCP_xxxx'cr''lf']
<add/TCT_xxxxxxxx'cr'
>add/TCT_xxxxxxxx'cr''lf']
<add/TCT_'cr'
>add/TCT_xxxxxxxx'cr''lf']
<add/RCT_xxxxx'cr'
>add/RCT_xxxxx'cr''lf']
<add/RCT_'cr'
>add/RCT_xxxxx'cr''lf']
<add/TDP_xxxx'cr'
>add/TDP_xxxx'cr''lf']
<add/TDP_'cr'
>add/TDP_xxxx'cr''lf']
<add/RDP_xxxx'cr'
>add/RDP_xxxx'cr''lf']
<add/RDP_'cr'
>add/RDP_xxxx'cr''lf']
<add/CTSD_xx'cr'
>add/CTSD_xx'cr''lf']
<add/CTSD_'cr'
>add/CTSD_xx'cr''lf']
<add/TET_xxxxx'cr'
>add/TET_xxxxx'cr''lf']
<add/TET_'cr'
>add/TET_xxxxx'cr''lf']
<add/RET_xxxxx'cr'
>add/RET_xxxxx'cr''lf']
<add/RET_'cr'
>add/RET_xxxxx'cr''lf']
Remote Control Operation
Where: xxxx = ODD, EVEN, or NONE.
Note: TX ASYNC Overhead only.
Where: xxxx = ODD, EVEN, or NONE.
Note: RX ASYNC Overhead only.
Where: xxxxxxxx = RS232, RS485 (4- Wire),
RS485_2W (2-Wire).
Note: TX ASYNC Overhead only.
Where: xxxxx = RS232 or RS485.
Note: RX ASYNC Overhead only.
Where: xxxx = NRM (normal data phasing), INV
(inverted data phasing).
Where: xxxx = NRM (normal data phasing), INV
(inverted data phasing).
Where: xx = 0 to 60 (number of seconds).
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: TX IDR Overhead only.
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: RX IDR Overhead only.
B–13

Advertisement

Table of Contents
loading

Table of Contents