Table of Contents
Advertisement
CDM-750 Advanced High-Speed Trunking Modem
Front Panel Operation
5.2.2.7.1.1 (FAST) FAST Options: Set
FAST: Set register1:
88888888888888888888
To enable new FAST options in the modem, the user must first obtain the FAST Access Code for
the new option from Comtech EF Data Customer Support. Once obtained, the FAST Access Code
must be entered carefully. First, use the
arrow keys to edit that digit. Press ENTER when the FAST Access Code has been fully
▲ ▼
entered.
If the FAST Access Code is entered correctly, the modem accepts the code and displays the
message "Configured correctly." The modem then resets to its default configuration.
If the FAST Access Code is not accepted, the modem displays the message "Failed to
configure. Re-enter code." Re-enter the code as instructed. Should the code entry
error persist after repeating the procedure, contact Comtech EF Data Customer Support for
further assistance.
5.2.2.7.1.2
(FAST) FAST Options: View
FAST: View options1: 01
Use the
arrow keys to view which FAST options are currently installed for that register.
▲ ▼
5.2.2.7.2
FAST: Demo-Mode
FAST Options Demo Mode: Off (Off,On)
1209600 seconds remaining.
Use the ▲ ▼ arrow keys to select Demo Mode as Off or On. When On, the bottom line will
display the number of seconds remaining for the free Demo Mode.
When enabled, Demo Mode allows access to ALL CDM-750 FAST options for 2592000 seconds
(30 full days). Demo Mode may be turned on and off an unlimited number of times until the full
2592000 seconds have expired. The time count only decrements when the mode is On.
When the Demo period expires, Demo-Mode screen displays the following message:
FAST Options Demo Mode: Expired
0000000 seconds remaining.
63 Mbps dRx data rate installed
Enter code below
then [ENTER] (34v)
◄ ►
arrow keys to select a digit to edit, and then use the
5–45
Revision 1
MN-CDM750
(v)
(v)
(v)
Advertisement
Table of Contents
