Removing The Cutter Motor Assy - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
10. Remove the two screws that secure the Cutter Motor Assy.
B) Silver, Phillips, Round Washer Head S-tite M3x5: two pieces
11. Remove the Cutter Motor Assy.
Cutter Motor Assy
Figure 3-156. Removing the Cutter Motor Assy
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Cutter Motor
Assy.
<Adjustment items>
1. Counter Reset (Cutter Motor Assy Counter)
2. Sensor Check (Cutter HP Sensor)
3. Cut Position Check & Adjustment
DISASSEMBLY & ASSEMBLY
Cutter motor mounting plate
Gear
Pulley
B
(see p277) and perform
Disassembly and Assembly Procedure
Revision A
225
Confidential