Epson Stylus Pro 4910 Service Manual page 424

Epson Stylus Pro 4900/Epson Stylus Pro 4910
[Lubrication 1-3]
Part Name Pickup Unit
Lubrication Point On the bearings of the SHAFT, ROLLER, PICKUP
Lubricants (Part Code) Grease G-71 (1304682)
φ 2 x 3 mm x 5 points
Amount
φ 2 mm injector
Lubrication Tool
Lubrication Manner Apply the specified amount with an injector.
Note ---
MAINTENANCE
Lubrication Points
[Lubrication 2]
Part Name HOLDER, LEVER, EDGE GUIDE RELEASE
A: On the portion where contacts with HOLDER, LEVER, EDGE
GUIDE RELEASE
Lubrication Point
B: On the portion where contacts with SPUR GEAR, 48
Lubricants (Part Code) Grease G-71 (1304682)
Α: φ 2 x 3 mm x 2 points
Amount
Β: φ 2 x 3 mm x 2 points
φ 2 mm injector
Lubrication Tool
Lubrication Manner Apply the specified amount with an injector.
After lubricating Point B, spread the lubricant evenly by rolling
SPUR GEAR, 48.
Note
Lubrication
Revision A
Lubrication Point B
Lubrication Point A
Confidential
425